System Cover; Removing The System Cover - Dell EMC PowerEdge T440 Installation And Service Manual

System cover

Removing the system cover

Prerequisites
1 Follow the safety guidelines listed in
2 Turn off the system and all attached peripherals.
3 Disconnect the system from the electrical outlet and peripherals.
4 If installed, remove the front
5 Place the system on a flat, stable surface.
Steps
1 Turn the latch release lock to the unlocked position.
2 Press the cover release latch and remove the system cover.
Figure 24. Removing the system cover
Next step
Install the system cover.
72 Installing and removing system components
Safety instructions.
bezel.