Dell EMC PowerEdge T440 Installation And Service Manual page 11

Item Components
2 System identification
button
3 Status LED indicator panel
4 Information tag
5 USB port 2.0
6 USB port 3.0
7 Optical drive bay
8 Drive slot
Icon Description
NOTE:
compliant operating system.
The System Identification (ID) button is available on the front and back of the
systems. Press the button to identify a system in a rack by turning on the
system ID button. You can also use the system ID button to reset iDRAC and
to access BIOS using the step through mode.
Indicate the status of the system. For more information, see
N/A
indicators.
The Information tag is a slide-out label panel that contains system information
N/A
such as Service Tag, NIC, MAC address, and so on. If you have opted for the
secure default access to iDRAC, the Information tag also contains the iDRAC
secure default password.
The USB ports are 4-pin, 2.0-compliant. These ports enable you to connect
USB devices to the system.
The USB port is USB 3.0 compliant.
N/A Enable you to install drives that are supported on your system. For more
information about drives, see
N/A Enables you to install TBUs for 8x and 16x backplane configurations, or drive
blank in the empty drive slot to maintain proper system cooling.
Press the power button to gracefully shut down an ACPI-
Technical specifications.
Dell EMC PowerEdge T440 system overview
Status LED
11