Installing A 2.5-Inch Drive Into A 3.5-Inch Drive Adapter - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 34. Removing a 2.5-inch drive from a 3.5-inch drive adapter
Next step
Install a 2.5-inch drive into a 3.5-inch drive

Installing a 2.5-inch drive into a 3.5-inch drive adapter

Prerequisites
1 Follow the safety guidelines listed in
2 Remove the 3.5-inch drive adapter from the 3.5-inch hot swappable drive carrier.
Steps
1 Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2 Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
82 Installing and removing system components
adapter.
Safety instructions.