Memory Specifications; Storage Controller Specifications; Drive Specifications; Drives - Dell EMC PowerEdge T440 Installation And Service Manual

Memory specifications

Table 15. Memory specifications
DIMM type DIMM rank
RDIMM Single rank
RDIMM Dual rank
RDIMM Dual rank
LRDIMM Quad rank

Storage controller specifications

The Dell EMC PowerEdge T440 system supports:
• Internal controllers: PowerEdge Expandable RAID Controller (PERC) H730P, HBA330, H740P, H330, Software RAID (SWRAID)S140
• External PERC (RAID): H840
• External HBAs (non-RAID): 12Gbps SAS HBA
• Boot Optimized Storage Subsystem (BOSS): HWRAID 2 x M.2 SSDs 120GB or 240GB with 6Gbps
– x8 connector using PCIe gen 2.0 x2 lanes, available only in the low-profile and half-height form factor

Drive specifications

Drives

The Dell EMC PowerEdge T440 system supports:
• Up to 4 x 3.5-inch cabled drives with drive adapter, internal, SATA, or Nearline SAS drives
or
• Up to 8 x 3.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives
or
• Up to 16 x 2.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives

Optical drive and tape drive

The Dell EMC PowerEdge T440 system supports:
• one optional slim SATA DVD-ROM drive or DVD +/-RW drive
• internal tape drives LTO5, LTO6, LTO7 and external SAS drives.
Your system supports one of the following configurations:
• Systems with cabled drives support one optical drive and one tape drive.
• Systems with hot-swappable drives support up to one optical drive and two tape drives.
DIMM
capacity
Minimum RAM
8 GB 8 GB
16 GB 16 GB
32 GB 32 GB
64 GB 64 GB
Single processor
Maximum RAM
80 GB
160 GB
320 GB
640 GB
Dual processors
Minimum RAM Maximum RAM
16 GB 128 GB
32 GB 256 GB
64 GB 512 GB
128 GB 1024 GB
Technical specifications 31