Installing The Expansion Card Holder - Dell EMC PowerEdge T440 Installation And Service Manual

2 Follow the procedure listed in
3 Remove the air shroud.
Step
Press the tab and remove the expansion-card holder from the chassis.
Figure 60. Removing the expansion card holder
Next steps
1 Install the air shroud.
2 Follow the procedure listed in

Installing the expansion card holder

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
Step
Align the expansion card holder with the projections on the chassis and push it down until firmly seated.
112 Installing and removing system components
Before working inside your
After working inside your system.
Safety instructions.
Before working inside your
system.
system.