Installing The Optical Or Tape Drive Blank - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 38. Removing the optical drive or tape drive blank
Next steps
1 Install the optical drive cage or tape
2 If applicable, install the

Installing the optical or tape drive blank

Prerequisites
1 Follow the safety guidelines listed in
2 If applicable, remove the front
Steps
1 Align the guide on the drive blank with the slot on drive bay.
2 Slide the drive into the slot until the latch snaps into place.
86 Installing and removing system components
drive.
bezel.
Safety instructions.
bezel.