Optional Internal Usb Memory Key; Replacing The Optional Internal Usb Memory Key; Expansion Card Holder; Removing The Expansion Card Holder - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 59. Installing the external cooling fan
Next steps
1 Install the air shroud.
2 Follow the safety guidelines listed in

Optional internal USB memory key

Replacing the optional internal USB memory key

Prerequisites
CAUTION: To avoid interference with other components in the server, the maximum permissible dimensions of the USB memory
key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
Steps
1 Locate the USB port or USB memory key on the system board.
To locate the USB port, see
2 If installed, remove the USB memory key from the USB port.
3 Insert the replacement USB memory key into the USB port.
Next steps
1 Follow the procedure listed in
2 While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.

Expansion card holder

Removing the expansion card holder

Prerequisites
1 Follow the safety guidelines listed in
After working inside your
Safety instructions.
Before working inside your
Jumpers and connectors.
After working inside your
Safety instructions.
system.
system.
system.
Installing and removing system components 111