Optional Front Bezel; Removing The Front Bezel; Installing The Front Bezel - Dell EMC PowerEdge T440 Installation And Service Manual

The key is required only if your system includes a bezel.
• Phillips #1 screwdriver
• Phillips #2 screwdriver
• Torx #T30 screwdriver
• Wrist grounding strap

Optional front bezel

Removing the front bezel

Prerequisite
Follow the safety guidelines listed in
Steps
1 Unlock the bezel by using the bezel key.
NOTE: There are two bezel keys attached to the back of the bezel.
2 Press the release latch at the top of the bezel.
3 Pull the top end of the bezel away from the system.
4 Unhook the bezel tabs from the slots at the bottom of the system, and pull the bezel away from the system.
Figure 16. Removing the front bezel

Installing the front bezel

Prerequisite
Follow the safety guidelines listed in
Steps
1 Locate and remove the bezel key.
Safety instructions.
Safety instructions.
Installing and removing system components 65