Downloading Drivers And Firmware - Dell EMC PowerEdge T440 Installation And Service Manual

Table 30. Firmware and drivers
Methods
From the Dell EMC support site
Using Dell Remote Access Controller Lifecycle Controller (iDRAC
with LC)
Using Dell Repository Manager (DRM)
Using Dell OpenManage Essentials (OME)
Using Dell Server Update Utility (SUU)
Using Dell OpenManage Deployment Toolkit (DTK)
Using iDRAC virtual media

Downloading drivers and firmware

Dell EMC recommends that you download and install the latest BIOS, drivers, and systems management firmware on your system.
Prerequisite
Ensure that you clear the web browser cache before downloading the drivers and firmware.
Steps
1 Go to www.dell.com/support/home.
2 In the Drivers & Downloads section, type the Service Tag of your system in the Enter a Service Tag or product ID box, and then click
Submit.
NOTE: If you do not have the Service Tag, select Detect Product to allow the system to automatically detect the
Service Tag, or click View products, and navigate to your product.
3 Click Drivers & Downloads.
The drivers that are applicable to your system are displayed.
4 Download the drivers to a USB drive, CD, or DVD.
Location
www.dell.com/support/home
www.dell.com/idracmanuals
www.dell.com/openmanagemanuals
www.dell.com/openmanagemanuals
www.dell.com/openmanagemanuals
www.dell.com/openmanagemanuals
Toolkit
www.dell.com/idracmanuals
Initial system setup and configuration
> Repository Manager
> OpenManage Essentials
> Server Update Utility
> OpenManage Deployment
39