Figure 64. Removing the filler bracket
Figure 65. Installing an expansion card
Next steps
1
Follow the procedure listed in
2
Install the expansion card
3
Install the air
shroud.
M.2 SSD module
Removing the M.2 SSD module
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the air
shroud.
4
Remove the BOSS card.
NOTE:
The procedure to remove the BOSS card is similar to the removing an expansion card.
116
Installing and removing system components
After working inside your
holder.
Safety
instructions.
Before working inside your
system.
system.