Installing The System Cover - Dell EMC PowerEdge T440 Installation And Service Manual

Installing the system cover

Prerequisite
NOTE: Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside the
system.
Follow the safety guidelines listed in
Steps
1 Align the tabs on the system cover with the slots on the chassis.
2 Press the cover release latch, and push the cover toward the chassis until the latch locks into place.
3 Rotate the latch release lock clockwise to the locked position.
Figure 25. Installing the system cover
Next steps
1 Place the system upright on its feet on a flat and stable surface.
2 If removed, install the
3 Reconnect the peripherals and connect the system to the electrical outlet.
4 Turn on the system, including all attached peripherals.
Safety instructions.
bezel.
Installing and removing system components 73