Updating Bios - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 94. Installing the system ears
Next steps
1 Install the system cover.
2 Install the system in the rack. For more information, see the Rack Installation Guide that is shipped with your system.
3 Follow the procedure listed in

Updating BIOS

About this task
To update the BIOS, perform the following steps:
Steps
1 Copy the BIOS update file on a USB device.
2 Plug in the USB device into any of the USB ports on your system.
3 Power on your system.
4 While booting, press F11 to enter the Boot Manager.
5 Go to System Utilities → BIOS Update File Explorer, and select the plugged in USB device.
6 From the BIOS Update File Explorer, select the BIOS update file.
The BIOS Update Utility with the current and new version of BIOS is displayed.
7 Select Continue BIOS Update to install the BIOS update.
After working inside your system.
Installing and removing system components 145