Removing A Cabled Drive - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 43. Installing the internal hard drive bay
Next steps
1 Follow the procedure listed in
2 Connect the data and power cables to the hard drive(s).

Removing a cabled drive

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the internal drive bay.
Steps
1 Remove the four screws securing the drive to the internal drive bay.
2 Remove the hard drive from the internal drive bay.
After working inside your system.
Safety instructions.
Before working inside your system.
Installing and removing system components 91