Status Led Indicators - Dell EMC PowerEdge T440 Installation And Service Manual

Item Components
3 Status LED indicator panel
4 Information tag
5 USB port 2.0
6 USB port 3.0
7 Optical drive bay
8 Drive slot
9 Physical drives

Status LED indicators

NOTE: The indicators display solid amber if any error occurs.
Figure 6. Status LED indicators
Table 5. Status LED indicators and descriptions
Icon Description
Health indicator
16 Dell EMC PowerEdge T440 system overview
Icon Description
Indicate the status of the system. For more information, see
N/A
indicators.
The Information tag is a slide-out label panel that contains system information
N/A
such as Service Tag, NIC, MAC address, and so on. If you have opted for the
secure default access to iDRAC, the Information tag also contains the iDRAC
secure default password.
The USB ports are 4-pin, 2.0-compliant. These ports enable you to connect
USB devices to the system.
The USB port is USB 3.0 compliant.
N/A Enable you to install drives that are supported on your system. For more
information about drives, see
N/A Enables you to install TBUs for 8x and 16x backplane configurations, or drive
blank in the empty drive slot to maintain proper system cooling.
N/A 3.5-inch drives and 2.5-inch drives/SSDs.
Condition
The indicator turns solid blue if the
system is in good health.
The indicator blinks amber, when the
system is:
• Powered on
• In standby
• In any error condition For
example, a failed fan, PSU, or a
drive
Technical specifications.
Corrective action
None required.
Check the System Event Log or system messages for
the specific issue.
For more information about error messages, see the
Event and Error Message Reference Guide for 14th
Generation Dell EMC PowerEdge Servers at
www.dell.com/qrl.
Status LED