Table of Contents
Advertisement
5. CUSTOM PAGES
5.1.4.
Example of autoclave
5.2.
Go to the menu page
2 operating modes are possible for custom pages:
•
View, that permits their use;
•
Edit, that permits their creation or configuration.
View mode is activated either by accessing custom pages
through the menu or by using dedicated keyboard keys for
direct access to Page 1 and Page 2 (the Page 2 access key
is only available in the 3850T model).
5.3.
Creating a custom page
Once you have accessed the custom page creation section,
select the first empty page with the help of the
keys.
The number of the displayed page appears at the top right.
Press the Custom Page 1 button again to display a + button
on the screen.
Touch the button to open a pop-up window with 10 but-
tons, one for each of the types of components that can be
added.
The X button at the top right will close the pop-up window
without making any changes. The object limits per page
are:
Max 20 LED widgets per page
Max 20 Button widgets per page
Max 16 Progress Bar widgets per page
Max 10 Image widgets per page
Max 40 numerical widgets per page (Data set, Data view)
Max 40 text widgets per page (Edit Text, Text, Note)
1 Change Page Button per type
The available components are:
•
Led: add a LED.
•
Edit Text: enter a field whose content is a message
contained in the controller message database. The
message is editable.
•
Text: add a field to display a fixed message stored in
the controller.
•
Note: add a field where you can write a message. The
message is stored in the controller and its translation is
not available.
92
The controller controls the processing temperature via a
PID (TIC), using the highest of the 3 T1, T2 and T3 tempera-
tures read in the autoclave as the reference temperature.
One of the three values read are selected with a Selection
Logic Function (MAX).
The page shows the values of process value (PV) and set-
point (SP) in numeric format, while 3 Bar graphs graphically
display the two PV and SP values and the PID (OUT) control
value percent. The setpoint value is editable from the page.
The page displays the internal pressure of the autoclave
(Autoclave pressure), the pressure inside of the bag
containing the material (Vacuum bag pressure) and two
temperatures of the material (TM1 and TM2).
Also on the page there is a component (ON/OFF button) for
the control of air recirculation inside the autoclave (Fan).
To switch between View mode and Edit mode, select the
page you want to configure and press the direct access
button on Page 1. Edit mode is secured by level 2 pass-
word.
To return to View mode from Edit mode, press the direct
access key on Page 1 again.
•
Progress: adds a rectangular component that is col-
ored, horizontally or vertically, in proportion to the value
and
of a variable.
•
Data View: adds a field in which a number is displayed
(read-only, for reading and writing see the Edit Field).
•
Data Set: adds a field in which a number is viewed and
set.
•
Button: adds a button that allows you to view the sta-
tus of a digital data and change it.
•
Image: adds an image taken from the collection of
images stored in the controller.
•
Change page: add buttons to change page.
5.3.1.
Screen coordinates
The screen is measured in pixels and every point is defined
by the distance in pixels from the upper left corner.
Horizontal distances are identified by the letter X (abscissa),
those vertically by the letter Y (ordinate). Each point is then
defined by a pair of values X, Y. The pixel at the top left of
the screen has 0, 0 coordinates.
The position and size of the components are defined by the
coordinates of their upper left corner and their width and
height measured in pixels.
5.3.2.
Creating and editing a component
To add a component, touch its button in the pop-up
window and then, when the window is closed, touch the
custom page where you want it to appear. The component
will be drawn automatically on the screen, in a default
80703B_MHW_2850T/3850T_02-2019_ENG
- Quick Links:
- Login Password
Hide quick links:
Advertisement
Table of Contents
