Cfg Hardware" Section; Setup" Section - gefran 3850T Use And Installation Manual

9. 2850T-3850T configuration in GF_eXpress
Warning!
You cannot enter two users with the same Username.
You cannot enter a user with an empty Username.
The Username and Password parameters are case-
sensitive
You cannot remove all level 2 (=Administrator) users.
9.4.5.

"CFG HARDWARE" section

As stated above, with the "CFG HARDWARE" button, the
user can set the 2850T-3850T product sections regarding
hardware configuration
Press the button to enter the configuration page for
2850T-3850T controller hardware resources (see image
below)
In the top part of the screen, you will see the combination
of boards:
• set by the user on the main page (if working Offline)
• on the target (if working Online)
Select the generic board and the section for configuring the
various terminals on this board will appear in the lower part
of the screen (see images below)
136
The wiring diagram of the various terminals will appear in the
"General" tab of each board.
In the tabs:
• IN analog
• OUT analog
• IN digital
• OUT digital
of the various boards, the parameters described in the
paragraph entitled "4.15.1. HW CFG sub-menu" on page
76 with related sub-paragraphs.
9.4.6.

"SETUP" section

As stated above, the "SETUP" button may be used to set the
sections in the 2850T-3850T product in relation to optional
functions
Press the button to enter the configuration page for
2850T-3850T controller optional functions (see image below)
IThe meaning of the various parameters appearing on the
configuration page is described in the section entitled
"4.15.3.1. "Controller model" SETUP" on page 80.
80703B_MHW_2850T/3850T_02-2019_ENG