Precision Component Configuration; Color; Overlapping Components; Led Component - gefran 3850T Use And Installation Manual

format that can then be Customized and completed, using
the contact point on the screen as the coordinate of its top
left corner.
To change the component that you just created, or an
existing one, touch it. You can select multiple components
in sequence. Multiple components may be selected in se-
quence; the selected objects will appear in pink.
On the display, to the right, 4 new buttons appear below the
+ button:
• -: delete the selected component(s).
• Deselect: cancel the component(s) selection
• At left: align two or more selected component on the
left side of the last selected component.
Al. top: align two or more selected component on the top
of the last selected component.
4 arrow buttons appear to the right which, held down, move
the component or components you select, pixel by pixel, in
the direction of the arrow.
The component can also be moved by selecting it and then
dragging it on the screen.
5.3.2.1.

Precision component configuration

Quickly touch a component twice to open its configuration
where you can define its operating properties.
Each page has a set of parameters that are common to all
pages and others that are specific to that component.
5.3.2.2.

Color

You can customize the color of one or more component el-
ements. To do this, just touch the
nent detail page and select the desired color in the pop-up
window. Alternatively, you can touch the adjacent field and
enter the RGB color code in hexadecimal notation.
5.3.2.3.

Overlapping components

The various different components may not be overlapped,
with the exception of images, which may be overlapped by
all other components.
5.3.3.

LED Component

This page allows you to configure the LED component
parameters. The available parameters are:
• X pos: distance in pixels from the top left corner of the
component to the left side of the screen.
• Y pos: distance in pixels from the top left corner of the
component to the top of the screen.
• X dim: component width in pixels.
• Y dim: component height in pixels.
• Variable: name of the variable associated with the LED
component.
80703B_MHW_2850T/3850T_02-2019_ENG
button in the compo-
• 3D / Flat: three-dimensional or flat aspect of the com-
ponent.
• Color OFF: LED component color when the associated
variable is OFF.
• Color ON: LED component color when the associated
variable is ON.
• Dim font: font size, if the LED has text. Possible choic-
es 8, 12, 16, 20, 24, 36, 50 pixel.
• Text OFF: optional text included in the LED component
that appears when the associated variable is OFF. Text
color can be customized with the field or button next
to it.
• Text ON: optional text included in the LED component
that appears when the associated variable is ON. Text
color can be customized with the field or button next
to it.
• Image OFF: optional image included in the LED com-
ponent that appears when the associated variable is
OFF.
• Image ON: optional image included in the LED compo-
nent that appears when the associated variable is ON.
The X button at the lower right closes the window, saving
changes .
5.3.4.

Edit Text component

This page allows you to configure the parameters of the
field set to contain a message can be viewed and edited
from the controller message database. The available pa-
rameters are:
• X pos: distance in pixels from the top left corner of the
component to the left side of the screen.
• Y pos: distance in pixels from the top left corner of the
component to the top of the screen.
• X dim: component width in pixels.
• Y dim: component height in pixels.
• Variable: name of the variable associated with the
field.
• Font: character size. Possible choices 8, 12, 16, 20,
24, 36, 50 pixel.
• Text color: text color.
• Background color: component background color.
The X button at the lower right closes the window, saving
changes.
5. CUSTOM PAGES
93