Hw And Functional Options Of The Target Not Aligned With Those Of The Configurator - gefran 3850T Use And Installation Manual

9. 2850T-3850T configuration in GF_eXpress
9.3.2. HW and functional options of the tar-
get not aligned with those of the configurator
If the HW and\or functional options of the target are different
from those of the configurator, the dialog box shown below
will appear
and configuration files may not be sent from the GF_eXpress
to the target.
The user can only:
• acquire configuration files from the target and import
them into GF_eXpress
• disconnect from the target and work offline
• Press the button at the top (see image below)
130
to view the options that must be activated in order to be
compatible with the target (see image below)
Once the HW resources and functional options have been
aligned with those of the target, it will be possible to send
files from the configurator to the target (see image below)
When one of the three actions listed above has been
completed, the user can start editing the various sections of
interest in the configurator in order to save them on the PC
or transfer them to the target.
80703B_MHW_2850T/3850T_02-2019_ENG