gefran 3850T Use And Installation Manual page 118

7. EXAMPLES AND APPLICATION NOTES
2. Select SETUP.
3. Select HW CFG.
4. Select module F_MIX.
5. Configure the type of thermocouple associated with
channel 1 (AI1) of the F-MIX module.
Touch IN1 Type and select TC_K (K thermocouple).
The default variable associated with the temperature
value of channel 1 is AI_01.
Touch IN2 Type and select TC_K (K thermocouple).
The default variable associated with the temperature
value of channel 2 is AI_02.
116
Touch IN3 Type and select TC_K (K thermocouple).
The default variable associated with the temperature
value of channel 3 is AI_03.
Select OUT Digital to access the digital signal config-
6.
uration.
The default variable associated with the digital control
of channel 1 (DO1) is DO_01. This command will be
associated with the HEAT action of the PID controller.
The default variable associated with the digital control
of channel 2 (DO2) is DO_02. This command will be as-
sociated with the COOL function of the PID controller.
7. Press the button twice to return to the HW CFG
menu.
8. Select VAR CFG to access the user variable configu-
ration.
Select the list of "Register" type variables by touching
the Register key in the Analog section.
Enter variable name "Average_value" in the first empty
row.In the D.P. (decimal point) column, set 1
80703B_MHW_2850T/3850T_02-2019_ENG