Offline Target Configuration - gefran 3850T Use And Installation Manual

9. 2850T-3850T configuration in GF_eXpress
9.2.

Offline Target Configuration

In this case, device configuration takes place entirely offline,
starting with the following basic configuration:
• 1 F-MIX board,
• no F-EU16 board,
• "GETlogic" option enabled
• "GETview" option enabled
• "controller PID" option enabled
• "Recorder" option enabled
• "Programmer" option enabled
see image below
Warning!
The user must align the HW and functional options set
in the configurator with those present on the target to be
used in the field, using the appropriate fields (see fields
that may be set in the upper part of the image above).
No configuration can be sent to the target until the
configurator and the target are aligned.
When the user changes at least one of the HW items or
functional options, a red square will appear containing a
message informing the user that they must press "Apply" to
make the change(s) effective (see image below)
128
Press "Undo" to cancel the changes made (see image
below).
Depending on the functional options selected, a number of
buttons appearing on the page will be disabled to prevent
the user from configuring sections which are not actually
available on the product purchased (see image below).
Warning!
Addition\removal of functional options and changes
to HW resources will result in addition\removal of
certain files (such as those associated with programs)
and IO variables. Addition of files and IO variables
always takes place using the default values.
80703B_MHW_2850T/3850T_02-2019_ENG