gefran 3850T Use And Installation Manual page 119

9. Press the button twice to return to the HW CFG
menu.
10. Select PID CFG to access the PID controller parameter
configuration.
11. Select Type to access the PID control type configura-
tion page.
The default operating mode is base PID control. PID
base means that PID Cascade, Valves, or Ratio are not
enabled.
80703B_MHW_2850T/3850T_02-2019_ENG
7. EXAMPLES AND APPLICATION NOTES
12. Select Variable to access the configuration page of the
variables associated with the PID controller.
Configure the PV parameter by selecting the Average_
value variable.
Configure the parameter OUT HEAT by selecting the
variable DO_01.
Configure the OUT COOL parameter selecting the
variable DO_02.
13. Select Base to access the PID controller control pa-
rameter configuration page.
With the parameters displayed, you can configure the
actions of the PID controller.
14. Press the button twice to return to the main
menu.
117