Adding Bar Graphs; Adding Data View - gefran 3850T Use And Installation Manual

5. CUSTOM PAGES
5.4.2.

Adding Bar Graphs

Add the three bars to the page to graphically display pro-
cess data percent.
For general instructions on adding and configuring a Bar
Graph, see paragraph "5.3.7. Progress Bar component" on
page 94.
Bar Graph for PV (1)
Add a Bar Graph component and set parameters to display
the PID1 PV value.
Bar Graph for SP (2)
Add a Bar Graph component and set parameters to display
the PID1 SP value. Notice how the Xdim, Ypos, and Ydim
values are the same as those of the Bar Graph component
for PV.
98
Bar Graph for OUT (3)
Add a Bar Graph component and set parameters to display
the PID1 OUT value. Notice how the Ypos and Ydim values
are the same as those of the Bar Graph component for PV.
5.4.3.

Adding Data View

Add the Data View component to the page to display the
numeric value of the PV process value.
For general instructions on how to enter and configure a
Data View read-only component see paragraph "5.3.8. Data
View component" on page 95.
Configure Data View (4) component parameters to display
the PID1 PV value.
80703B_MHW_2850T/3850T_02-2019_ENG