Monitor Recorder - gefran 3850T Use And Installation Manual

4.4.

Monitor Recorder

If the programmer option does not appear, the instrument
has a number of record pages. These pages may be used
to manage record recipes (start up, stop, etc).
The Monitor Program page is always accessible:
• using the Home Page  Monitor  Monitor Prog
menu or more simply
• by touching the
in the lower left hand corner of the display
There are three different views, showing one, two or four
records at the same time, respectively. For each record, you
may:
• start with the START button
• stop with the STOP button
• assign a name to the record, which will then appear in
the "batch name" field
• view progressive record time
View 1 recorder
View 2 recorders
View 4 recorders
80703B_MHW_2850T/3850T_02-2019_ENG
button which appears at all times
The procedure for control recipe settings is very similar to
that of the programmer, with the same pages and the same
settings. The reader is therefore referred to the explanation
appearing at "4.13.3.4. Program report configuration" on
page 69.
4. CONFIGURATION
37