2-Curve Setpoint Profile - gefran 3850T Use And Installation Manual

7.7.3.

2-curve setpoint profile

The example describes the sequence of operations to con-
figure a profile that manages 2 SPs and 4 output events.
The curve drawn in red (Profile 1) is associated with the
PID1 controller SP and the green curve (Profile 2) is associ-
ated with the SP of the PID2 controller.
For the configuration, the following variables are used as
output events:
Type Name
Digital Output (DO5) DO_05 Event 1 command output
Digital Output (DO6) DO_06 Event 2 command output
Digital Output (DO7) DO_07 Event 3 command output
Digital Output (DO8) DO_08 Event 4 command output
The tabel summarises times and setpoints (SPs) used to
generate profiles.
To configure the 2-curve setpoint profile, proceed as fol-
lows:
1. Login with level 2 password.
Segment Time
number (mm:ss)
1 15:00
2 60:00
3 10:00
4 16:30
80703B_MHW_2850T/3850T_02-2019_ENG
Description
TIME AND SETPOINT SUMMARY TABLE
SP profile 1 SP profile 2
50 30
100 40
100 40
50 35
50 10
7. EXAMPLES AND APPLICATION NOTES
2. Select PROGRAMS to access SP profile configuration.
3. Press the button to enter a new program.
4. In the "Program Name" field, enter the name that will
identify the SP profile generation program.
Touch Save to store the new program and access its
configuration.
Event OUT1 Event OUT2
OFF OFF
ON OFF
OFF ON
OFF OFF
Event OUT3 Event OUT4
ON ON
OFF OFF
ON OFF
OFF ON
119