Setup Menu; Hw Cfg Sub-Menu; I/O Terminal Exchange - gefran 3850T Use And Installation Manual

4. CONFIGURATION

4.15. SETUP Menu

4.15.1. HW CFG sub-menu

To use this sub-menu, the user must be level 1 or 2.
The HW CFG sub-menu lets you to configure the F-MIX and
F-EU16 controller modules. The number of keys displayed
depends on its composition.
• : lets you open the I/O terminal exchange page.
• F-MIX: lets you open the configuration page for all
F-MIX modules (analog and digital). The first page to
appear is the analog input configuration page.
• F-EU16: lets you open the configuration page for all
F-EU16 modules (digital only). The first page to appear
is the input configuration page.
76
HW CFG sub-menu (page 76)
F-MIX and F-EU16 module configuration and exchang-
ing terminals.
ALARM CFG sub-menu (page 80)
Alarm configuration.
SETUP MGR sub-menu (page 82)
Configuring pages and programs, managing configura-
tion recipe and image management.
PID CFG sub-menu (page 82)
PID configuration.
VAR CFG sub-menu (page 90)
User variable configuration.
USER CFG sub-menu (page 90)
Creating new users.

4.15.1.1. I/O terminal exchange

The page lets you to exchange two HW terminals, analog or
digital (provided the same type), without any impact on the
program and logic functions.
Four pairs are available: analog inputs, analog outputs,
digital inputs and digital outputs.
Each row shows the terminal number and the name of the
associated variable.
To make an exchange, choose one of the two pair variables
one after the other by tapping the name of the variable and
selecting it from the pop-up window that opens.
Then tap the key to start the exchange.
The DI/DO sim ON button enables control of input by the
external GetLogic tool
80703B_MHW_2850T/3850T_02-2019_ENG