Programmer Editor" Section; Getlogic" Section - gefran 3850T Use And Installation Manual

9. 2850T-3850T configuration in GF_eXpress
9.4.1.

"PROGRAMMER EDITOR" section

As stated above, the "PROGRAMMER EDITOR" button can
be used to set the sections of the 2850T-3850T product
corresponding to programs.
Press this button to go to the start page listing all the
available programs (see image below)
At this point, you may:
• Edit one of the programs already present using the
icon
• Add a new program using the "New Program" button
• Select\Deselect all the programs using the "Select All"
button
• Delete all the selected programs with the "Delete All"
button
• Delete a single program with the "X" button
When you edit the generic program, you will go into the
configuration pages for the various parameters organised in
different tabs:
• Base
• Segments
• GETLogic
• Report
• Graphics
(see image below)
The meaning of the various parameters appearing in the
different tabs is as described in the chapter entitled "4.13.
PROGRAMS Menu" on page 51 and the various sections
thereof.
The content and functioning of the following tabs:
• GETLogic
• Graphics
will be described in the chapters about them.
132
9.4.1.1.

"GETLogic" section

The "GETLogic" tab may be used to configure the logical\
mathematical functions associated with the selected
program (see image below).
The area on the left contains a series of buttons which may
be used to:
• enable\disable representation of Logical\Mathematical
functions in a format typical of contact ladder
languages ("Ladder OFF\Ladder ON" button)
• enable\disable display of the descriptions associated
with the logical\mathematical functions ("Description
OFF\Description ON" button)
• Enter a new Logical\Mathematical function in the
selected position ("Insert Logic" button)
• Enter a new Logical\Mathematical function after the
ones already present ("New Logic" button)
When either "Insert Logic" or "New Logic" is pressed, a
dialog box appears containing a list of the different types of
Logical\Mathematical functions that may be used (see image
below).
A description of the functioning and configuration of the
available Logical\Mathematical functions appears in the
paragraph entitled "4.13.3.3. GETlogic configuration" on
80703B_MHW_2850T/3850T_02-2019_ENG