This chapter describes the commissioning process of the Safety Module. The process of
commissioning ensures that the Safety Module functions properly. In addition, the
chapter describes how the module is exchanged.
Before beginning the commissioning process, make sure that the following prerequisites
have been fulfilled:
1 The Safety Module is installed correctly.
2 No people or parts are in the danger zone.
3 The converter is ready for use.
CAUTION!
The commissioning of the Safety Module is only allowed after the acclimation of the
module.
Please take note of
during the commissioning process.
13.1 General safety regulations
h Follow the chapter
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
C
OMMISSIONING AND EXCHANGE
13
ZTroubleshooting and rectification–
ZSafety–
from page 17 .
OF THE MODULE
from page 87 for rectifying errors
Document no.: 5.09013.07
77
of 114