Description Of The Default And Parameter Module; General; Compatibility List - Baumuller BM5-O-SAF-000 Operating Instructions Manual

This chapter describes the SAF-000 (Default and Parameter module) with it´s functions
and the type code applied to the module.
7.1

General

To operate the axis units of the b maXX 5000 device series, the slot A of the device has
to be assembled with a module (see 5.09021, Manual b maXX 5000, too). If no safety
functions are required, the module SAF-000 can be used. There are two variants avail-
able:
m BM5-O-SAF-000-001-001-#00 Default module
m BM5-O-SAF-000-000-000-#00 Parameter module
7.2

Compatibility list

The SAF-000 modules Default and Parameter can only be operated in combination with
converters of the type b maXX 5000 released by the company Baumüller GmbH.
If the converter was previously equipped with a module with a higher safety level
(SAF-001/002/003), the parameter storage of the converter must be reset with the Reset-
Module.
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
D
ESCRIPTION OF THE
7
n The module itself has no functionality and is used if no additional functions such as
parameter storage or safety functions, for example, are required.
n The module is provided with a user storage for the functional parameters for the axis
unit. In case of service the module can be plugged in an exchange unit. Therefore it
is possible to transmit the parameters to the exchange unit in an easy way.
P
AND ARAMETER
Document no.: 5.09013.07
D
EFAULT
M
ODULE
31
of 114