Maximum Response Time; Properties Of The Parameter Memory - Baumuller BM5-O-SAF-000 Operating Instructions Manual

8.9

Maximum response time

The maximum response time of the Safety Module (SAF-001-000-xxx) is t
The maximum response time of the Safety Module (SAF-001-001-xxx) is t
For the input voltage range specified in chapter
current–
corresponding power module is underrun during this response time. Below this threshold
the pulse inhibitor of the converter (see chapter
page 38) is active.

8.10 Properties of the parameter memory

The default parameterization of the converter is stored in the parameter memory. If the
converter should be exchanged, the parameter data are available and can be copied from
the Safety Module (SAF-001) to the new converter.
NOTICE!
The parameter data cannot be copied to the Safety Module (SAF-001), if a complete
data set which was loaded before of that from the RAM with all the parameters, 
was loaded in the flash memory of the b maXX 5000 again.
The Safety Module (SAF-001-001-xxx) has no parameter memory.
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Description of the Safety Module (SAF-001)
from page 52 onward, the voltage threshold on the output side of the
ZSwitching thresholds for voltage and
ZCompatibility list SAF-001-000-xxx–
Document no.: 5.09013.07
8
 20 ms.
R
 45 ms.
R
on
53
of 114