Disposal; Safety Regulations; Requirements On The Personnel Conducting The Work; Disposal Instructions - Baumuller BM5-O-SAF-000 Operating Instructions Manual

This chapter describes the proper and safe disposal of the Safety Module (STO). For the
most part, it can be classified as electronic scrap.
m Prerequisite: The disassembly process has already been carried out, see

20.1 Safety regulations

The disposal may only be conducted in compliance with the safety regulations. Observe
special local regulations as well, if applicable. If you are not able to conduct the disposal
yourself, hire a suitable waste removal company to do so.

20.2 Requirements on the personnel conducting the work

The personnel you assign to carry out the disposal/disassembly must have the
knowledge and training necessary to perform this work properly. The personnel should
be selected so that it will be able to understand and use the safety instructions attached
to the converter and its components.

20.3 Disposal instructions

Prerequisites Safety Module (STO) has already been disassembled properly.
Sheet steel Parts of the module are made of galvanized sheet steel. Sheet steel must be put into the
cycle of potential recyclables for ferrous metals.
Electronic scrap Electronic scrap (circuit boards), which cannot be disassembled further must be disposed
of as special waste. Observe the applicable regulations in doing so.
Plastic The housing is made of plastic. Plastic must be put into the cycle of potential recyclables
for plastics.
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
ZDisassembly, storage–
from page 93 onward.
Document no.: 5.09013.07
D
ISPOSAL
20
95
of 114