Requirements On The Personnel Conducting The Work; Assembly Instructions - Baumuller BM5-O-SAF-000 Operating Instructions Manual

12.2

Requirements on the personnel conducting the work

h Follow the information in the chapter
12.2 Requirements on the personnel conducting the work
Qualified personnel refers to persons who have been authorized by the parties in charge
of the plant safety to conduct the necessary activities applicable and are able to detect
and avail potential dangers due to their training, experience, instruction and knowledge
of the relevant standards and provisions, accident prevention regulations and operating
conditions. Example of the qualifications required for work with the unit include:
m Training or instruction in accordance with the safety technology standards in the

12.3 Assembly instructions

The assembly of the converter is described in the operation manual for the converter.
72 Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07
of 114
DANGER!
Live-threatening danger from electrical current!
The device and surrounding area in the electrical cabinet can carry life-threatening
voltages.
Therefore:
m Make sure that power to the device and surrounding area is shut off before
beginning work.
m Follow the applicable safety regulations when handling devices carrying high
voltages.
m Ensure that this module is assembled and installed exclusively by qualified
personnel.
maintenance and use of suitable safety equipment.
DANGER!
Live-threatening danger from electrical current!
The device and surrounding area in the electrical cabinet can carry life-threatening
voltages.
Therefore:
m Make sure that power to the device and surrounding area is shut off before
beginning work.
m Follow the applicable safety regulations when handling devices carrying high
voltages.
ZSafety–
from page 17 onward.
Baumüller Nürnberg GmbH