Table of Contents
Advertisement
12
Assembly and installation
The following tools will be needed:
m Torx screwdriver (size TX8) for fastening the plug-in module in the converter.
h Ensure that the suitable converter is available (see chapter
ZCompatibility list SAF-
001-000-xxx–
on page 38).
Perform the assembly as follows:
1 Plug the plug-in module into the mounting opening of the frequency converter.
2 Secure the module against unintentional falling out with the torx screw.
Figure 25:
Assembly of plug-in module
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
73
Document no.: 5.09013.07
of 114
Hide quick links:
Advertisement
Table of Contents
