Personnel Training - Baumuller BM5-O-SAF-000 Operating Instructions Manual

4.6

Personnel training

4.6 Personnel training
WARNING!
Risk of injury if operated by insufficiently qualified persons!
Improper handling can lead to severe personal injury and property damage.
Therefore:
m Only allow certain activities to be conducted by persons specified in the respective
The following qualifications for various areas of operation are specified in the operation
manual:
m Operating personnel
m Qualified personnel
20 Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07
of 114
chapters of this operation manual.
The drive system may only be operated by persons who have been trained, instructed
and authorized to do so.
Troubleshooting, repairs, cleaning, maintenance and exchange may only be
conducted by trained or instructed personnel. These persons must be familiar with the
operation manual and act according to it.
Commissioning and instruction may only be conducted by qualified personnel.
Electrical engineers and specialist electricians of the customer or a third party who are
authorized by Baumüller Nürnberg GmbH, trained and certified in the installation and
commissioning of Baumüller drive systems and commissioning, grounding and
designating electrical systems and devices in accordance with the safety engineering
standards.
Qualified personnel is educated or trained in the maintenance and use of suitable
safety equipment in accordance with the respective local safety engineering standards.
Baumüller Nürnberg GmbH