Button For Verification Purposes - Baumuller BM5-O-SAF-000 Operating Instructions Manual

8.11.2 Button for verification purposes

The button on the front of the Safety Module (SAF-001-000-xxx) is used to confirm the
data transfer of the default parameter data of the converter to the parameter memory of
the Safety Module (SAF-001-000-xxx). The button must be actuated as follows: Long –
short – short – long (long > 1000 ms, 500 ms < short < 1000 ms, see also the chapter
ZExchanging the module–
Figure 17:
The Safety Module (SAF-001-001-xxx) has no button.
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Description of the Safety Module (SAF-001)
from page 79 onward).
Button S1
Button S1 on the Safety Module (SAF-001-000-xxx)
S1
H1
H2
X1
Document no.: 5.09013.07
8
Type plate
55
of 114