12
Assembly and installation
In order to be able to fulfill the EN 60204-1 standard (electrical equipment of machines),
you will have to use the cables it recommends. The connection plugs must not be able to
fall out - otherwise, the danger of short circuits, external voltage, etc. will arise.
h Make sure that the connection cable is routed in an EMC-compatible manner.
12.4.2 Requirements on the connection cable
The connection cable must be selected in accordance with the EN 60204-1 standard.
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
75
Document no.: 5.09013.07
of 114