Installation; Requirements For The Electrical Connection - Baumuller BM5-O-SAF-000 Operating Instructions Manual

12.4

Installation

12.4 Installation
Wire the Safety Module (SAF-001) in accordance with the following connection diagram.
See also chapter
Figure 26:

12.4.1 Requirements for the electrical connection

74 Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07
of 114
ZInput circuitry–
H1
H2
X1
Connector X1
Connection diagram of the Safety Module (SAF-001)
CAUTION!
Danger due to faulty wiring!
The module can be damaged or destroyed if the requirements for the electrical
connection of the module are not met.
Therefore:
m Make sure that the connection values specified in technical data are met and that
the connections are carried out according to the specifications.
m Prevent a short circuit between inputs and outputs. A short circuit between inputs
and outputs can destroy the plug-in module.
from page 42 onward.
S1
Pin assignment connector X1
Pin Assignment
1 STO_1A_GND
2 STO_1B_GND
3 FS_1_GND
4 STO_2A_GND
5 STO_2B_GND
6 FS_2_GND
7 STO_2A_24V
8 STO_1A_24V
9 STO_1B_24V
10 FS_1_24V
11 STO_2A_24V
12 STO_2B_24V
13 FS_2_24V
14 STO_1A_24V
Baumüller Nürnberg GmbH