Configuration
The eight pages within the Configuration tab contain the core controls needed during
initial setup or for upgrading the unit and restoring a configuration.
Figure 15.
Using these pages, an administrator can:
•
•
•
•
•
•
•
•
•
•
Configuration Tab Features
The pages within Configuration include the following (figure 15 above):
1
2
3
4
Configuration Tab and Subtabs
Configure basic AV input settings
Configure digital Input and Output ports
Output video test patterns for setup
Configure output stream settings and presets
Set up AV encoding and streaming
Set passwords
Set up notices and alarms
Configure basic communication, identity, time, and data storage settings
Upgrade the unit by updating firmware
Save configurations or restore a configuration from a saved file
Input/Output Settings — Makes it possible to change the name for the input, select
an aspect ratio type, and enable or disable Auto‑Image, Auto Memory, and HDCP
Authorized. This page includes audio configuration controls to adjust audio levels.
It also allows the user to select the refresh rate for the local HDMI output, enable the
HDMI OSD, and select HDCP Notification (see
page).
EDID — Makes it possible to choose the preferred resolution and refresh rate for the
HDMI input, from a selection of common settings, as well as configure custom EDID
(see
EDID
on page 30).
Image Settings — Makes it possible to configure video input sampling and sizing,
set up overscanning of SMPTE input signals, and adjust picture controls (brightness,
contrast, and the like). It also allows the user to save or recall input presets (see
Settings
on page 31).
NOTE: When the image size is increased above 1920x1080 the encoder receives a
1920x1080 region cropped from the up-scaled image.
Encoding & Streaming — (see
Use these settings to:
Set up AV encoding
•
Configure the streaming method, protocol, and settings
•
Create, save, and recall encoder and streaming presets
•
Set up mask OSD and test patterns
•
Select fonts for metadata information
•
Configure metadata elements
•
Configure video test patterns
•
Input/Output Settings
Encoder Settings and Streaming
SME 211 • Web-Based User Interface
on the next
Image
on page 32)
25