Table of Contents
Advertisement
NOTE: RTSP presets can only be saved or recalled when the main (front panel) stream
control is off.
Streaming presets save the following parameters:
Preset name
RTSP stream name (QoS is saved or
recalled for RTSP pull)
Streaming method and protocol
Stream port
MTU
TTL
Encode and Stream Preset Builder
Encoder Presets and Streaming Presets are combinations of encoding and
streaming presets. For example, an encoding preset allows the content resolution and frame
rate to be saved and recalled, while a streaming preset allows the network settings (for
example, IP addresses and port numbers) to be saved and recalled for each stream type.
A combined preset allows content and network settings to be saved together for specific
applications.
NOTES:
•
An administrator can see or change these settings.
•
RTSP presets can only be saved or recalled when the main (front panel) stream
control is off.
Encoder presets save the following parameters:
ENCODER PRESETS
Video resolution
Audio bitrate
Video bitrate
Audio delay
Frame rate
Streaming mode
Bitrate control
OSD configuration
The Mask, OSD and Test Patterns panel in the Encoding & Streaming page
allows selection and immediate output of one of seven internally stored test patterns or a
universal OSD to all streams and the HDMI output from the SME 211.
Video test patterns are helpful for calibrating connected displays or projectors for color,
convergence, focus, resolution, contrast, and aspect ratio. The audio test option is useful for
testing audio output.
Mask settings
Use the drop-down list in this panel to select the image to display when the Mask function is
enabled. Images located in the user file system in the images folder will be displayed in the
STREAMING PRESETS
Multicast IP/destination (for multicast only)
RTSP over HTTP port (for pull streaming only)
QoS (for push streaming only)
SAP setting (for push streaming only)
RTMP publish URL (for RTMP push only)
Advanced section of RTMP, such as the
RTMP port, username, and password (for
RTMP push only)
Profile level
Profile type
Preset name
SME 211 • Web-Based User Interface
38
Advertisement
Table of Contents
