Table of Contents
Advertisement
Users and Roles
In the Users and Roles page within Configuration, an administrator can set up
both administrator and user level passwords. Passwords are not required, though they are
recommended for controlling access to configuration functions.
NOTES:
•
If only an administrator password is set, only administrators are able to log in to the
SME 211 pages. Users have no access.
•
To allow user access to a password-protected unit, set both an administrator
password and a user password, and users must log in using the user password.
•
An administrator password is required before a user password can be set.
Passwords can be set up only via this page or using SIS commands (see
Security Settings
To open this page, click the Configuration tab at the top of the SME 211 embedded
web pages and then click the Users and Roles tab on the second tier of tabs.
The Users and Roles page opens, showing the Password panel (see figure 30).
Figure 30.
Setting Passwords
If no passwords are set, anyone who opens the internal web pages is connected with
administrator-level access and can make changes to all settings. To limit access and prevent
changes to system configuration, the following options are available:
Set an administrator level password only — This option allows only administrators
•
to access the SME 211 web pages. End users cannot log in and use the web pages.
•
Set both an administrator level password and a user level password — This
allows administrators to log in and manage all aspects of the SME 211. Users can log in
to use just the AV Controls panel and the Device Status page.
To set passwords:
1.
Enter the desired password, at least four characters long, into the Administrator
Password field in the Login ID: admin panel (see figure 30,
Passwords must consist of up to 128 characters. The pipe character ( | ) is not
•
allowed.
Passwords are case-sensitive and cannot be a single space character.
•
2.
Enter the same password into the Confirm Password field directly below the
Administrator Password field. Once a password is entered, the fields in the
Login ID: user panel (see figure 30,
on page 73).
Password Panel
1
above).
2
SME 211 • Web-Based User Interface
Password and
above).
43
Advertisement
Table of Contents
