Click the Advanced Settings drop-down arrow to configure settings for:
•
MTU — Enter the desired bitrate for the MTU
•
TTL — Enter the necessary TTL value for multicast operation
NOTE: When using unicast, the TTL is set to 64 by default.
•
DiffServe QoS — Select the desired DiffServe QoS from this drop-down menu
NOTE: High (CS4) is usually recommended for live streaming video and audio.
Local network policies or conditions may apply, consult with the Network
Administrator.
•
RTSP over HTTP port — Enter the HTTP port number to use for the stream
•
Enable Multicast — Enable or disable Multicast by clicking this check box
Destination — Enter the destination IP address
•
UDP/RTP (Push) stream
•
Stream URI — Read-only string compiled based on the settings below (enter on the
decoder to connect)
•
Transport — Select the appropriate stream transport:
TS/UDP — Lower latency with some decoders
•
TS/RTP — Default and best for decoder compatibility
•
ES/RTP — Certain special applications
•
•
Destination (IP/Host) — Enter the target
•
Port and Port range — UDP ports used for audio and video streams (and RTCP
control with RTP)
•
Content — Select the type of content (Audio Only, Video Only, Audio &
Video)
Click the Advanced Settings drop-down arrow to configure settings for:
•
MTU — Enter the desired bitrate for the MTU
•
TTL — Enter the necessary TTL value for multicast operation
NOTE: When using unicast, the TTL is set to 64 by default.
•
DiffServe QoS — Select the desired DiffServe QoS from this drop-down menu
NOTE: High (CS4) is usually recommended for live streaming video and audio.
Local network policies or conditions may apply, consult with the Network
Administrator.
•
Enable SAP — Allows the stream to be announced on the network for easy discovery
and connection by decoders
Announce Interval — The time in seconds between each announcement (0 is
•
automatic)
•
Session Name — The logical name for this stream (to appear in the decoder listing)
•
Description — Additional description text (appears as comments in VLC)
•
Author — The group name for streams
Keywords — Used to allow stream filtering and selection in some applications
•
SME 211 • Web-Based User Interface
35