Table of Contents
Advertisement
Command and Response Tables
Command
Function
Information Requests
NOTE:
An asterisk (*) after the version number indicates the currently running version. Question marks (?.??) indicate that only factory
firmware is loaded. A caret (^) indicates the firmware version that should be running, but a Mode 1 reset (see
Modes
on page 12) was executed and the default factory firmware is running. An exclamation point (!) indicates corrupted firmware.
These apply to 0Q-4Q.
Firmware version
Firmware and build
version
Verbose version info
Bootstrap Version
Factory Firmware
Version
Example:
Updated firmware
version
Query part number
Query model name
Query model description
Query system memory
usage
Query location
View stream resolution
and frame rate
X4%
KEY:
= Firmware version number
SIS Command
(Host to Device)
Q or 1Q
*Q/q
0Q
2Q
3Q
3Q
4Q
Example:
N
1I
2I
3I
5I
31I
Response
(Device to Host)
X4%]
X4%]
]
Sum of 2Q-3Q-4Q
X4% ]
X4%
plus Web ver.‑desc‑UL date/
]
time
1.00.0000-b2325(1.81LX-SME 211 -Sat, 10 Feb 2018 20:10
]
UTC)
X4%
plus Web ver.‑desc‑UL date/
]
time
1.00.0004-b2635*(1.81LX-SME 211 -Sun, 11 Feb 2018 00:12
]
UTC)
]
60-XXXX-01
]
Example: SME•211
Streaming•Media•Encoder
#Bytes used out of #KBytes
]
<Location>
<Stream resolution>*<Frame rate>
SME 211 • Remote Communication and Control
Additional Description
SME 211 Series Reset
Firmware version to 2 decimal
places (
).
1.00
Firmware version to 2 decimal
places plus build number to 4
decimal places (
1.12.1234
Show bootstrap, factory‑
installed, and updated firmware
version.
The bootstrap firmware is
not user replaceable but this
information may be needed for
troubleshooting.
Factory installed firmware is not
user replaceable. This firmware
is the version the SME reverts to
after a Mode 1 reset.
Use this command to find
out which version of firmware
has been uploaded into the
SME 211.
]
]
]
).
66
Advertisement
Table of Contents
