Table of Contents
Advertisement
Introduction
This section gives an overview of the user guide and describes the SME 211 and its
features. Topics that are covered include:
•
•
•
•
About this Guide
This guide contains installation, configuration, and operating information for the SME 211.
•
•
•
About the SME 211
The SME 211 is a high performance H.264 streaming media encoder for streaming audio
and video signals over IP networks. It accepts an HDMI signal with embedded audio and
a stereo analog audio signal. The SME 211 supports unicast and multicast streaming
protocols, including RTMP. The SME 211 can stream at two different resolutions and bit
rates concurrently, supporting up to six simultaneous streams with push and pull streaming.
Built in audio mixing and DSP features enable enhanced audio processing without requiring
external mixing and DSP equipment.
See
About this Guide
About the SME 211
General Product Overview
Features
"Codec" refers to the H.264 / MPEG-4 AVC video codec or AAC-LC audio codec.
"Stream" can refer to audio, video, or both that is transmitted by the SME.
"UI" and "Web UI" refer to the web-based user interface.
figure 1
on the next page for an example of a typical SME 211 application.
SME 211 • Introduction
1
Advertisement
Table of Contents
