Table of Contents
Advertisement
variables, see
Changing the Font Used for the Metadata Overlay
To set up the universal OSD test pattern:
1.
Open the Encoding & Streaming page.
2.
Expand the OSD Configuration panel at the bottom of the page.
3.
Select Universal OSD from the Test Patterns drop-down list. The fields and drop-
down menus in the Universal OSD section become accessible.
4.
Enter the text (up to 16 characters) into the Display Text field within the universal
OSD area. This is the first text that appears in the universal OSD.
5.
Select an information category from the Information 1 drop-down list. If desired,
select from the Information 2 and Information 3 drop-down lists.
Figure 25.
Universal OSD Information Selection
The categories are identical to those used in the SIS information commands (such as
1i, 2i, 3i, and so forth). For reference, see
page 66.
Changes are saved automatically and applied shortly after being selected. The universal
OSD text appears on-screen in this format:
Display Text, Information 1, Information 2, Information 3.
See figure 26 for an example of how the configuration settings (on the left) translate to
the universal OSD (on the right).
Figure 26.
Universal OSD Information Selection
on the next page.
Command and Response Tables
SME 211 • Web-Based User Interface
on
40
Advertisement
Table of Contents
