Reference Information; Mounting The Sme 211; Tabletop Use; Furniture Mounting - Extron electronics SME 211 User Manual

Reference
Information
This section provides information about:
•
•
•
•
Mounting the SME 211
The 1U-high, half-rack width, 9.5-inch deep SME 211 Streaming Media Encoder can be:
•
•
•
•
See the SME 211 product page at

Tabletop Use

The SME 211 includes rubber feet (not installed). For tabletop use, attach a self-adhesive
rubber foot to each corner on the bottom of the unit.

Furniture Mounting

Furniture mount the SME 211 using an optional under-desk or through-desk mounting kit.
Follow the instructions included with the mounting kit.
Table or Wall Mounting
Extron table or wall mounting brackets extend approximately 1/4 inch (6.4 mm) above
the top surface of the SME 211 enclosure. This design allows an air space between the
mounting surface and the enclosure. Follow the instructions included with the mounting kit.

Rack Mounting

For rack mounting using the included rack mounts, do not install the rubber feet. Mount the
SME 211 on a 19-inch universal or basic rack shelf.
Mounting the SME 211
Supported Stream Types, Drive Formats, and Browsers
Streaming Method Overview
Glossary
Set on a table
Mounted on a rack shelf
Mounted under a desk or tabletop
Mounted on a projector bracket
www.extron.com for compatible mounting kits.
SME 211 • Reference Information 86