Tabs
The pages in the SME 211 are grouped within four main tabs at the top of the screen:
Figure 9.
Four Main Function Tabs
Device Status — This single page provides a view of the status of the input and
1
outputs, along with details of the active stream or streams (the current event). The
URLs of the stream or streams are also displayed on this page (see
page 24).
Configuration — The eight pages within this tab contain the core controls typically
2
needed during initial setup, or for upgrading the unit, or restoring a configuration. They
make it possible for an administrator to:
Configure basic AV input settings
•
Output video test patterns for setup
•
Save or apply EDID settings
•
Configure output stream image settings and presets
•
Set up AV encoding and presets
•
Configure metadata and create streaming profiles
•
Set passwords
•
Set up notices and alarms
•
The Configuration pages also provide a way to configure basic communication,
identity, time, and data storage settings. These pages also make it possible to update
firmware, save a configuration, or restore a configuration from a saved file (see
Configuration
on page 25).
File Management — This page provides a way to view folders and files on the
3
internal drive and any attached external drive or drives. It also provides a way to
connect the SME to shared network drives, and upload fonts to the SME (see
Management
on page 49).
Troubleshooting (see
4
this tab display factory-defined and user-defined information including:
Detailed system status and encoder status
•
A log of events and a log of alarms with their status, which can be exported to a
•
CSV file
Three simple diagnostic tools for checking network connections
•
Options to perform many types of resets on the SME
•
Pages Within Tabs
The Configuration, and Troubleshooting tabs each include several pages. To
access each page, click the corresponding function within the second tier of tabs (sub-
tabs) located below the main tabs near the top of the screen (Configuration > Input/
Output Settings is shown selected in figure 10 below).
Figure 10.
Pages Within Tabs (Subtabs)
Troubleshooting
on page 51) — The five pages within
SME 211 • Web-Based User Interface
Device Status
on
File
19