Some of the information in this page can also be found using SIS commands (see
Command and Response Tables
on page 66).
To open this page, click the Troubleshooting tab at the top of the SME 211 embedded
web pages and then click the Status tab on the second tier of tabs.
The Status page opens, showing the Detailed System Status (see figure 37,
1
below) and Encoder Status (
) panels.
2
1
3
4
2
Figure 37.
Troubleshooting, Status Page
All of the items on this page are read-only except the hyperlink to the Extron website
Find new firmware on Extron.com (
) where updated firmware for the unit is located,
3
and the Sync button (
) which commands the unit to sync its internal clock time and date
4
with the settings from an NTP server.
Logs
The Logs page within Troubleshooting displays a list (log) of alerts and notices for
any event set up for any status other than Disabled in Configuration > Alarms and
Traps > Alarm Message panel. All log entries are read-only. The logs can be sorted,
filtered, searched, or exported to a comma-separated values (CSV) file.
To open this page, click the Troubleshooting tab at the top of the embedded web
SME 211 • Web-Based User Interface
53