Table of Contents
Advertisement
3.
If no user password is set, click Save (see
upper right of the Password panel.
To set a user password, complete steps 4 through 6.
4.
To set a user level password, type a desired password into the User Password field in
the Login ID: user panel (
5.
Type the same password into the Confirm Password field directly below the
User Password field.
6.
Click Save (
). Both the administrator and user passwords are saved.
3
Clearing Passwords
To remove (clear) a password, click Clear (
password and click Save (
3
NOTE: When the administrator password is cleared, the user password is also cleared.
figure
30,
).
2
) corresponding to the administrator or user
4
) to remove.
SME 211 • Web-Based User Interface
on the previous page) in the
3
44
Advertisement
Table of Contents
