Status
This panel displays the current status of each encoder and their respective stream methods.
Stream Status
•
Enabled — The stream method is enabled
•
Disabled — The stream method is disabled
Live Streaming — The video or audio are being streamed
•
•
Waiting —
RTSP: Stream method is enabled, but no client is yet connected
•
RTMP: Device is attempting to connect to server and waiting for a response
•
NOTE: If the connection has not been established after 20 seconds, check the
server state (to ensure it has transitioned to the receive state), URL, and key
details, and attempt to restart the stream.
•
Stopped — Streaming is currently stopped
For RTMP push to social media:
•
Stopped — The device or server is inactive
•
Connecting — The device is attempting to connect
Waiting — The server is configured and ready for a connection
•
•
Connected — The device and server are communicating
•
Live Streaming — The video or audio are being streamed
•
Error — The device was unable to connect to the server (IF down, no internet, unable
to resolve IP, wrong IP, wrong port, wrong path, wrong key, wrong state)
Encoder Settings
This panel contains fields to configure the audio and video settings of the encoders.
NOTE: Internal video signal flow is from Encoder 1 to Encoder 2. For best performance
always set Encoder 1 to the higher resolution, if they differ.
Audio encoding
In this section, select or configure settings for:
•
Audio Source — Select the desired audio source (Digital, Analog, or
•
Audio Bitrate — Select the desired audio bitrate in kbps
•
Audio Delay — Enter the desired audio delay
•
Audio Sample rate — Select the desired audio sample rate
Video encoding
In this section, select or configure settings for:
Resolution — Select the desired resolution
•
NOTE: If both encoders are using presets with custom resolutions, recalling a
different preset with a custom resolution is not possible. Manually adjusting the
custom width or height settings is still possible.
SME 211 • Web-Based User Interface
)
Mixed
33