Table of Contents
Advertisement
Playing a Pull Stream Using QuickTime Media Player
Use the following procedure to playback and view SME 211 streams on the QuickTime
player program.
NOTE: Only QuickTime 7 is able to play streams. QuickTime 10 does not support
stream playback.
1.
If you know the stream URL, go to step 4. Otherwise, to obtain the stream URL, access
the Web-based User Interface of the SME 211 (see
on page 66).
NOTE: If no password is set, anyone can view the stream URL. If a password is set,
you must be logged in to view the URL.
The Device Status page opens (see figure 55 below).
Figure 55.
2.
Note the Streaming URL Unicast URL in the Stream URL line.
3.
Open QuickTime player. From the desktop, select:
Start > All Programs > QuickTime > QuickTime Player.
The QuickTime media player opens.
4.
From the File menu, select Open URL (see figure 56,
Figure 56.
The Open URL dialog opens (see figure 56 above).
5.
In the Enter an Internet URL to open field, enter the stream URL that was noted
in step 2 above (
Device Status Page
1
1
QuickTime Player Menu — Open URL
).
1
Command and Response Tables
).
1
SME 211 • Reference Information
107
Advertisement
Table of Contents
