Multicast Ip Addressing For Multiple Sme 211 Installations - Extron electronics SME 211 User Manual

Multicast IP Addressing for Multiple SME 211 Installations

Pull streaming (RTSP)
When multiple SME 211 devices are installed in a system and multicast addressing is used
for push or pull streaming, please follow the guidelines below for configuration.
NOTE: Always discuss multicast IP address assignments with your local IT
administrator to confirm that there are no conflicts with existing or planned services.
For most applications, the multicast address should use 239 as the first octect and should
be unique for each SME 211. The port number can remain at the default (7000) as show in
the following table.
Device
SME1
SME2
SME3
NOTE: The SME 211 automatically inserts the ending port number when the initial port
number is entered.
Push streaming (TS/UDP, TS/RTP, ES/RTP)
Push streams to a multicast address generally require only two ports, except for ES/RTP
which requires four. When push streaming from multiple SME 211 devices to multicast
addresses, the same IP address rules apply as with pull streaming.
Multicast IP addresses and port numbers may be configured on the SME 211 web interface
on the Configuration / Encoding and Streaming page.
SME IP
192.168.254.10 239.199.188.138
192.168.254.11 239.199.188.139
192.168.254.12 239.199.188.140
Multicast IP Multicast Port
SME 211 • Reference Information
7000
7000
7000
94